Installation
PriorityStart! Installation Item List
Item A. PriorityStart! Unit
Item B. Post Adapter
Item C. PriorityStart! Pos (+) Red Cable
Item D. U-Clip
Item E. PriorityStart! Ground Wire
Item F. Attachment Band
Item G. LED Power Indicator
Top-Post Setup
Installation for Vehicle
1a. [TOP POST ONLY] Using a 7/8" wrench, tighten Post Adaptor (Item B) firmly into top of PriorityStart! [Fig. 1].
1b. [SIDE POST ONLY] Using a 7/8" wrench, take Post Adaptor (Item B) off of PriorityStart! Tighten firmly into positive terminal of battery [Fig. 6].
2. Install band (Item F) around battery.
3. Reconnect negative battery cable to negative battery post and install U-Clip (Item D) to terminal [Fig. 2 or Fig. 7]. Connect ground wire (Item E) to U-Clip [Fig. 3 or Fig. 8].
4. Connect PriorityStart! red cable (Item C) to positive post on battery [Fig. 4 or Fig. 9].
5. Connect vehicle positive cable to PriorityStart! [Fig. 4 or Fig. 9].
6. Place PriorityStart! under band (Item F) [Fig. 5].
Now Operational!
For installation, please use the actual owner's manual here.
Side-Post Setup
